![]() This means that if you moved it before installing Yosemite, you need to move it back before making your installer disk. (The Terminal command used here assumes the drive is named Untitled.) Also, make sure the Yosemite installer, called Install OS X Yosemite.app, is in its default location in your main Applications folder (/Applications). Connect to your Mac a properly formatted 8GB (or larger) drive, and rename the drive Untitled.Using the createinstallmedia command in Terminal Here are the required steps: This tutorial to properly format the drive.) Your OS X user account must also have administrator privileges. That drive must also be formatted with a GUID Partition Table. Whichever method you use, you need a Mac-formatted drive (a hard drive, solid-state drive, thumb drive, or USB stick) that’s big enough to hold the installer and all its data-I recommend at least an 8GB flash drive. The Disk Utility-via-Terminal approach is for the shell junkies out there. The Disk Utility method is the way to go for people who are more comfortable in the Finder (though it does require a couple Terminal commands), and it works under Snow Leopard, Lion, Mountain Lion, Mavericks, and Yosemite. (Note that the createinstallmedia tool doesn’t work under OS X 10.6 Snow Leopard-it requires OS X 10.7 Lion or later.) The createinstallmedia method is the easiest if you’re at all comfortable using Terminal, it’s the approach that I recommend you try first. I’ve come up with three ways you can create a bootable OS X install drive for the Yosemite: using the installer’s built-in createinstallmedia tool using Disk Utility or performing the Disk Utility procedure using Terminal. Will require SSDT-AWAC.aml and SSDT-RHUB.amlįor Coffee Lake Plus and Comet Lake and Ice Lake extra aml files are required that are attached, don't forget to add them to your config.Create the Yosemite install drive: The options MacBookPro16,1, or MacBookPro16,3, or MacBookPro16,4 Will require SSDT-AWAC.aml and SSDT-PMC.aml (don't use SSDT-PMC on Comet Lake)Įnable-dpcd-max-link-rate-fix -> 01000000Įnable-max-pixel-clock-override -> 01000000 HD 6000 -> MacBookAir7,1 or MacBookAir7,2įor UHD620 users (Kaby Lake-R), you'll need a device-id spoof:ĪAPL,ig-platform-id -> 0900A53E (for UHD630)ĪAPL,ig-platform-id -> 00009B3E (for UHD620) To edit your ist in Windows or Macĭevice Properties - Add - PciRoot(0x0)/Pci(0x2,0x0)ĪAPL,ig-platform-id -> 03006601 (To be used with 1366 by 768 displays or lower)ĪAPL,ig-platform-id -> 04006601 (To be used with 1600 by 900 displays or higher)ĪAPL,ig-platform-id -> 09006601 To be used with some devices that have eDP connected monitor (contrary to classical LVDS), must be tested with 0300666601 first before trying this. Once you have reached the macOS desktop, you will need to mount your EFI partition to then copy over your EFI folder from your USB disk. ![]() Leave the USB plugged in as you will need to reboot from this a few times while macOS is installing Then you want to erase the drive and start the installation Once you have reached the installer, choose Disk Utility and then click on view and then show all devices It may look like it has frozen in some places, but boot from USB can be slow, so please be patient. Now, boot with your USB stick, the ist has verbose enabled so you can see what is going on. Your hack will not boot with CFG-Lock enabled)ĭVMT Pre-Allocated(iGPU Memory): 64MB or 128MB Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly)ĬFG Lock (MSR 0圎2 write protection)(This must be off, if you can't find the option then enable AppleXcpmCfgLock under Kernel -> Quirks. VT-d (can be enabled if you set DisableIoMapper to YES) You will want to make some changes here, if you can change these options: Once you have made those changes, save your ist and reboot your machine into your BIOS. This is currently set to MacBookPro13,1 which is for a Skylake laptop, read post 2 for configurations Then scroll further down until you find SystemProductName. ![]() (Making sure you have the correct kext in your kexts folder) Building a CustoMac Hackintosh: Buyer's Guide
0 Comments
Leave a Reply. |